Printable PU Heat Transfer White Vinyl

incl GST {{ selectedOption.saleSavingsPercent }}% OFF

Serves: {{selectedOption.serves}}

Quantity                    Discount
5 to 9 metres 10% off
10 metres or more 15% off
- +

Stock Notification

We are unable to ship this product. Available at our retail store only.

SKU #
Quantity                    Discount
5 to 9 metres 10% off
10 metres or more 15% off

Digi-flex White Printable PU Heat Transfer Media 500mm x 1m is an excellent choice for Digital Heat Transfers.  It is a Polyurethane, Eco friendly product and supports Eco Solvent Digital Printers-Cutters such as Roland and Mimaki.  It provides a high quality printing surface, cuts and weeks easily and has a soft Polyurethane texture.

Digi-flex White Printable PU Heat Transfer Media 500mm x 1m Features

  • Environmentally Friendly
  • Elastic soft feel
  • High quality print surface

Once your transfer is printed, cut and weeded you must use a Masking Tape to remove the transfer for the carrier so that it can be applied to the garment.

Click here to order Application Tape, this is an essential accessory to be able to complete the application process successfully.

Application tape can also be useful in preventing coloured inks from evaporating from printable heat transfers film which is exposed to air when kept for a period of time. The tape leaves no sticky residue after application.

1. Setup graphics to print- with correct cut line

2. Print and cut graphics

3. Weed away excess media

4. Apply application tape or masking film over top

5. Remove graphics from carrier

6. Pre-press garment for 2-3 seconds.

7. Position graphics on garment

8. Heat press on medium pressure for 5-8 seconds

9. Allow print to cool and peel away carrier

10. Re-press using Teflon cover sheet for 3-5 seconds

Notes

You would need to use a cut line recognised by your print/ rip software, leave enough bleed or colour for the cut to move as it is being cut and for an accurate contour cut.

Always test cut prior to any production run. Printer/ Cutter settings  will need to be adjusted as the blade ages. For optimal  cutting and weeding, maintain a line thickness of at least  1/8” for lettering & logos.

 

COMPOSITION

DIGI-FLEX WHITE

(Excluding 100 Micron PET Carrie): 85 MIC

(30 MIC. PU, 55 MIC. Hotmelt)

500mm(19.68") Roll Width

25M (27.34 YD) Per Roll

 

WASH

Printed products can be machine or hand

washed at no more than 40 degrees Celsius.

should also be washed inside out.

Write Review

Printable PU Heat Transfer White Vinyl Reviews


There are not yet any reviews on this product.

Instagram @ccg_decorative_apparel

Want to be kept up to date with
the latest products and specials

Sign up successful!