Vastex LittleRed X3D Infrared DTG Capable Conveyor Dryers 54", 240V 17,800w.

was

Serves: {{selectedOption.serves}}

- +

Stock Notification

SKU #

The multi-purpose LittleRed X3-D infrared dryer cures direct-to-garment (DTG) printed textiles as well as plastisol, water-based and discharge-printed garments at higher rates than possible with conventional dryer designs.

Available in 30, 54 and 78 in. (76, 137, and 198 cm) belt widths, it features a high-powered pre-heating zone that rockets ink temperatures past 300°F (149°C) within the first several inches of conveyor travel, maximizing the distance and dwell time for optimum curing of any ink, allowing increased conveyor belt speeds and dryer output.

The Little Red X3-D-30 model is equipped with a 30 in. (76.2 cm) wide conveyor belt and three 24 in. (61 cm) wide infrared heaters (8900W @ 240V total wattage) and can cure 360+ plastisol-printed garments/h, 185+ water-based or discharge-printed garments/h, and up to 51+ garments/h inkjet printed with digital white ink at 3 minutes dwell time.

The 54 in. (137 cm) wide LittleRed X3-D-54 model cures 720+ plastisol-printed garments/h, 370+ water-based or discharge-printed garments/h, and 103+ garments/h inkjet printed with digital white ink or pretreated for DTG printing at 3 minutes dwell time.

The 78 in. (198 cm) wide LittleRed X3-D-78 model accommodates up to three rows of garments, and cures a whopping 1080+ plastisol-printed garments/h, 555+ water-based or discharge-printed garments/h, and 155+ garments/h inkjet printed with digital white ink or pretreated for DTG printing at 3 minutes dwell time.

The X3-D-30 and X3-D-54 models have an overall conveyor belt length of 88 in. (224 cm) long while the X3-D-78 model has an overall length of 102 in. (260 cm). The heating chamber for all three models is 41 in. (104 cm) long and features a powerful, targeted exhaust system as standard to rapidly remove moisture and air contaminates from the heating chamber, as well as cool the skin and controls.

With a second X3 chamber, the LR-X3D-30-2 and LR-X3D-54-2 can handle higher production including longer times necessary for Kornit printers.

FLEXIBLE

Can cure plastisol, water-based, discharge and inkjet-printed white ink in record time

POWERFUL

LittleRed X3D-30 has 8900W@240V total wattage

 

LittleRed X3D-54 has 17,800W@240V total wattage

LittleRed X3D-78 has 26,700W@240 total wattage

DEPENDABLE

Industry-leading 15-year heater warranty

EFFICIENT

Closely spaced coils provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing

FAST

LittleRed X3D-30

360+ garments/hr for plastisol inks, 185+ garments/hr for water-based or discharge inks, 51+ garments/hr for DTG digital white ink @ 3 minutes, 61+ garments/hr @ 2.5 minutes

LittleRed X3D-54

720+ garments/hr for plastisol inks, 370+ garments/hr for water-based or discharge inks, 123+ garments/hr for DTG digital white ink @ 3 minutes, 103+ garments/hr @ 2.5 minutes

LittleRed X3D-78

1080+ garments/hr for plastisol inks, 555+ garments/hr for water-based or discharge inks, 185+ garments/hr for DTG digital white ink @ 3 minutes, 155+ garments/hr @ 2.5 minutes

CONSISTENT

Low friction belt aligner and DC belt speed control with digital display

HEAVY DUTY

"X-Series" Conveyor Belt Roller Tracking System with Teflon coated fiberglass belt and HD belt motor

ACCURATE

Dual digital PID Temperature controller is accurate to +/-1°F

ADJUSTABLE

2 - 7 in. (5 - 18 cm) belt-to-heater clearance, adjustable separately on each side for each heater

EXPANDABLE

Add additional chambers and belt extensions

OPTIONS

Additional heating chambers and conveyor belt extensions

Locking casters for mobility

Creeper gear

Write Review

Vastex LittleRed X3D Infrared DTG Capable Conveyor Dryers 54", 240V 17,800w. Reviews


There are not yet any reviews on this product.

CCG
Suppliers of raw materials for the screen
printing & pottery industries

Want to be kept up to date?

Sign up successful!