EasiWay EasiSolv 701N Screen Wash & Stain Remover

EasiWay EasiSolv 701N Screen Wash & Stain Remover is an environmentally approved, 100% active, low odour, extremely quick penetrating, and fast-acting solvent designed to dissolve and clean virtually all types of screen printable inks, adhesives, clear coatings, and stains from printing mesh. Plastisol, UV/solvent, conductive and industrial inks are quickly dissolved with EasiWay EasiSolv 701N Screen Wash & Stain Remover without the hazards and odours usually associated with aggressive solvents and caustic stain/haze removers. EasiSolv 701N works quickly and causes no damage to printing mesh when used as a stain remover.

Ink Types: Plastisol, UV/Solvent, Conductive, Industrial

SCREEN WASH APPLICATION

• Open tab
• ??Scrape excess ink from the screen.
• Apply EasiSolv 701 to the (well) ink and print side of the screen. Scrub if necessary.
• Squeegee excess off the screen.
• Using a good high-pressure washer, spray rinse the screen starting at the bottom of the ink side and work up. Give good attention to the image area of the screen. Rinse the print side of the screen.
• Apply an Easiway Systems, Inc. approved emulsion/stencil remover. The screen will now be ready for reuse.
• If stubborn stains remain, apply EasiSolv 701 as a stain remover and high-pressure rinse.

STAIN REMOVER APPLICATION

• Open tab
• Remove all ink and emulsion from the screen
• Apply EasiSolv 701 stain remover to the (well) ink and print side of the screen and scrub
• High pressure rinse both sides of the screen
• Slowly flood rinse your screen to activate degreasing agents