Please note: The colour image is as close a representation that we can provide, please consult the Union Ink Color Guide for the true representation.
100% cotton white or dyed fabric. Consistent & accurate colour matches
Stencils: Use any direct emulsion or capillary film compatible with plastisol inks Additives: We do not recommend reducing Mixopake inks when printing on dark fabrics as this will reduce the opacity of the finished print. If necessary, reduce with 5-10% of Reducer (PLRE9000).
When printing on light coloured fabrics you may add Extender Base or Soft-hand Base in a ratio of up to three parts base to one part ink. This will reduce the opacity of the ink and result in a softer hand however, the colour will not be changed.
Colour Mixing Instructions: The formulas and instructions for simulating the standard PANTONE° colours and the Union Ink standard colours are available free after registering at www.unionink.com.
Printing on Cotton / Polyester Blends: For excellent results on cotton / polyester blended fabrics, substitute MIXE Low Bleed colours for the standard Mixopake colours.
Alternately, the regular colours can be printed over a low-bleed underbase white such as PLHE1070 Diamond White and PLHE1050 Mercury Low Bleed White
Whites. Overprint Mixopake inks through 140-305 (55-120 metric) monofilament mesh. Curing Instructions: These inks will fully cure when the entire thickness of ink layer reaches 149°C.
Coverage: High Opacity
After Flash Tack: Decreases with increased mesh
Angle: 10° - 20°
Mesh: 60 to 230
Storage Temperature: 18°C - 35°C
Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements prior to using in production.
Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.