||Price- 500mm Roll Width
|Up to 4 metres
||$29.50 per metre
|10 metres or more
||$24.50 per metre
Digi-flex Reflective Printable PU Heat Transfer Media 500mm x 1m is a lightweight product used for producing multi-colour Reflective Transfers for apparel. It is compatible with printer cutters using Eco Solvent Inks such as Roland and Mimaki.
Digi-flex Reflective Printable PU Heat Transfer Media 500mm x 1m Features
- Environmentally Friendly
- Elastic soft feel
- High quality print surface
Once your transfer is printed, cut and weeded you must use a Masking Tape to remove the transfer for the carrier so that it can be applied to the garment.
Click here to order Application Tape, this is an essential accessory to be able to complete the application process successfully.
Application tape can also be useful in preventing coloured inks from evaporating from printable heat transfers film which is exposed to air when kept for a period of time. The tape leaves no sticky residue after application.
1. Setup graphics to print- with correct cut line
2. Print and cut graphics
3. Weed away excess media
4. Apply application tape or masking film over top
5. Remove graphics from carrier
6. Pre-press garment for 2-3 seconds.
7. Position graphics on garment
8. Heat press on medium pressure for 5-8 seconds
9. Allow print to cool and peel away carrier
10. Re-press using Teflon cover sheet for 3-5 seconds
You would need to use a cut line recognised by your print/ rip software, leave enough bleed or colour for the cut to move as it is being cut and for an accurate contour cut.
Always test cut prior to any production run. Printer/ Cutter settings will need to be adjusted as the blade ages. For optimal cutting and weeding, maintain a line thickness of at least 1/8” for lettering & logos.
(Excluding 100 Micron PET Carrie): 85 MIC
(30 MIC. PU, 55 MIC. Hotmelt)
510mm(19.68") Roll Width
Printed products can be machine or hand
washed at no more than 40 degrees Celsius.
should also be washed inside out.