Easiway EasiStrip Supra Dip Tank Ink & Emulsion Remover is designed to dissolve plastisol inks and remove emulsion from the screen printing mesh-at the same time. This product is for use in a dip tank-for superior time and chemical savings. EasiStrip Supra is an ultra-concentrated liquid and designed to be mixed with water 1:7 while remaining homogenous.
With EasiStrip SUPRA, textile screens can be cleaned for pennies by combining many of the cleaning processes into one. EasiStrip SUPRA is a zero VOC, low odour, non-flammable, non-hazardous product that will provide the benefits of less labour, less expense, and improved efficiency to the screen cleaning and reclaiming operation. This concentrated one step ink & emulsion remover is designed to be used as part of the Easiway dip tank system.
Ink Types: Plastisol, Waterbased
EMULSION REMOVER APPLICATION - DIP TANK USE
- Open tab
- Mix EasiStrip SUPRA at a ratio of up to 1:7 with water in a plastic tank.
- Scrape excess ink from the screen.
- Place screen in the dip tank.
- Let your screen soak in the tank until the emulsion/film loosens from screen, usually 2-4 minutes.
- High-pressure rinse screen, then flood rinse.
- If stubborn stains remain, apply an Easiway Systems, Inc. approved stain remover, scrub and rinse.
EMULSION REMOVER APPLICATION - MANUAL USE
- Open tab
- Scrape excess ink from the screen.
- Apply EasiStrip SUPRA by brush, wipe, scrub pad, or spray to the print side of the screen and scrub.
- Apply to the ink (well) side of the screen and scrub.
- High-pressure rinse from the print side followed by high-pressure rinse from the well side, giving good attention to the image area and frame.
- Flood rinse the entire screen with a low-pressure rinse.
- If stubborn stains remain, apply an Easiway Systems approved stain remover, scrub and rinse.
