Description
DTF Station Lumen S24F 3D Embossed UV DTF Printer is a 24-inch / 60 cm 3D embossed UV DTF printer for shops creating raised branding on selected structured fabric accessories.
Paired with Image Presto, the workflow lets operators select the raised area visually, apply relief treatments, inspect a 3D preview and export named channels to NeoStampa.
The result is a more manageable path from ordinary customer artwork to dimensional output—supported by white ink circulation, auto-cleaning, alerts, sensors, static control and built-in purification.
What it is for
Raised, not flat
Emboss UV DTF gives a transfer real depth and texture that a standard flat transfer cannot.
Built for garments, not just rigid surfaces
Standard UV ink is formulated for hard, flat things and fails within a few bends on fabric or leather. This one is built to move.
Raised patches as a product you sell
A category most shops send out or turn down, brought in house and finished on the same press you already run.
AI-assisted 3D layering
Built-in AI turns flat artwork into layered, dimensional designs, so getting to a raised print is a step in the workflow rather than a separate skill to learn.
Fume extraction built in
Filtration is integrated, so the machine runs on an open shop floor without a separate extraction unit or ducting to install.
It looks after its own heads
White ink circulates and cleaning runs automatically, which is what keeps a UV machine consistent between runs instead of needing a routine before every job.
What comes with it
- Lifetime DTF Station tech support
- One-year limited warranty on non-consumable parts
- neoStampa RIP included
- Install and troubleshooting video library, plus a searchable knowledge base
FAQs
1. Do I need Photoshop to prepare the spot channels?
Not for the Image Presto spot-channel prep path. Artwork can still originate in the design software you already use.
2. What dimensional effects can I create?
LUMEN supports raised and glossy varnish effects. Image Presto currently provides 31 relief and stitch-style treatments (Embroidery effects are still under testing ).
3. What products is LUMEN intended for?
Selected structured fabric products such as patches, tote bags, hats, shoes and similar accessories.
4. Can I use it for T-shirts?
It is not recommended for T-shirt production.
5. How fast does it print?
Approx. 0.5 m²/h based on our default settings. Actual throughput varies with relief height, coverage and print mode.
6. Does the built-in purifier mean I do not need ventilation?
Yes but room ventilation is still recommended.
7. What are the power requirements?
1,000 W total; 110 V / 9.1 A or 220 V / 4.55 A. This includes a 200 W purifier system.
Specifications
Print width: 24 in (60 cm)
Print speed: 0.5 m²/h
Printheads: Epson i1600-U1 + Epson i3200-U1HD
Ink configuration: CMYK + White + Varnish
Resolution: 720 × 1200 dpi
Transfer Settings: 140–150°C (284–302°F), 10–15s, 50–65 psi (Medium Pressure), adjust slightly based on material.
Software: Image Presto + NeoStampa RIP + DTF Station Pilot
White Ink Management: White ink circulation
Printhead Cleaning: Auto-cleaning
Alerts / Sensors: Ink alerts; head-strike sensor; cover safety sensor; film sensor
Static Control: Included
Fume Management: Built-in purifier
Dimensions: (W×D×H) 157cm x 90.5cm x 46.4 x 118cm
Weight: 167 kg
User interface: Single integrated touchscreen
Connectivity: Ethernet, USB, Wi-Fi available
RIP compatibility: neoStampa, DTF Station Pilot
