Saati Ultrafix SB2 Plus Screen Mesh Adhesive with Hardener is a 2-part frame adhesive.

Characteristics

Two-component polyurethane adhesive
Blue with low viscosity for medium to fine mesh counts
Mounts screen mesh onto aluminum, steel, iron, plastic-coated and wood frames
30-50 minute pot-life, mix in small quantities as required

Features

Extraordinary initial adhesion allows screens to be removed from the stretching system only minutes after applying
Superior resistance to solvents, heat and automatic cleaning machines

Benefits

Superior flexibility polyurethane adhesive prevents cracking
Quicker drying time than other urethane adhesives saves time in stretching

Directions for use

Mix 5 parts of Ultrafix SB2 Plus adhesive with 1 part of Catalyst by weight. Use within 30 to 50 minutes.
To obtain optimal adhesion, degrease the frame.
Stretch the fabric over the frame providing good contact between the two. Apply the prepared mixture with a brush.
After the adhesive has dried and cured, release tension and remove the screen from the stretching system.
To achieve maximum heat and solvent resistance, allow adhesive to cure for 24 hours before use.

Health and safety

When sealed in the original container and stored in cool conditions, Saati Chemicals products will maintain their original properties for two years from the date of production. Prevent from freezing.

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Shop by category

Shop by top brands

Review Saati Ultrafix SB2 Plus Screen Mesh Adhesive with Hardener

Instagram @ccg_decorative_apparel

Want to be kept up to date with the latest products and specials

Want to be kept up to date with
the latest products and specials