Description
Alba Spot remover is a is a volatile silicone-based liquid dry spotter for removing all dry oil based stains.
Made to remove stains that are not soluble in water. This includes oil, grease, graphite, tar, adhesives, paint, oily foods, make up, shoe marks and more.
It is safe to use on most fabrics – both dry clean only fabrics (s-coded) and washable fabrics. Great for use on clothing, upholstery, drapery, carpeting and more.
It has a moderate to fast evaporation rate and leaves zero residue. This allows Alba Spot Remover to be used before or after dry cleaning.
The low odour makes Alba Spot Remover a safe and pleasant product to use. Great for use on clothing, upholstery, drapery, carpeting and more.
Benefits:
• Removes grease, oil & dirt stains.
• Leaves no residue
• Very mild odour & high flash-point
• For use in California & all other states
Directions for use:
• Apply by hand or in spotting gun
• Safe for use on all fabrics
• Evaporates completely leaving no residue.
• Does NOT contain trichloroethylene.
Technical Data:
Use Alba Spot Remover to loosen dry side stains, such as: grease, oil, tar, adhesives, paint, lipstick, make up, shoe polis, asphalt, oily salad dressings and other oil-based stains.
Dry Cleaning Directions
PRE DRY CLEANING: Place stained fabric on your spotting board. Put a cleaning white cloth (i.e. cheesecloth or towel) under the stained area. Apply Alba Spot Remover using a spotting gun or by hand using a clean rag, with the vacuum running. Dry spotted area thoroughly, before applying any additional spotters, or placing the garment into the machine for cleaning.
TOUCH-UP SPOTTING: Alba Spot Remover is great for use in removing oily stains that may remain on fabrics after dry cleaning. Apply using a clean cloth and a dry spotting brush or spray through a spotting gun. Rub lightly with the cheesecloth and tamp with the brush, if necessary. “Feather” cleaned area by rubbing outside edges of area that was spotted.
If any ring or circle remains, this can be easily removed using AlbaChem® PSR Dry Cleaning Fluid II Lifter.
• Use Alba to rinse solvent pre-spotters.
• Will not add any odours to machine chemical bath.
Household Customer Directions
Use only in a well ventilated area. Place an absorbent material under stained area, if possible. Pour a small amount of Alba Sport Remover onto a clean white cloth rub area to remove
any excess liquid. Reapply if necessary. Always test Alba on a hidden part the fabric first.
