Lustre Purple/Violet

incl GST {{ selectedOption.saleSavingsPercent }}% OFF

Serves: {{selectedOption.serves}}

- +

Stock Notification

We are unable to ship this product. Available at our retail store only.

SKU #

Lustres for Brush Application on Glass, Porcelain, Bone China, Earthenware and Tiles

Lustres are based on metallic compounds dissolved in organic solvents.  After firing they form a very thin layer (less than 0.1 μm). Typical characteristics of lustres are their brilliance as well as their metallic iridescent brightness which occurs after firing on smooth substrates.

The lustre loses its iridescent effect on matt surfaces and appears matt.  Lustres are suitable for the decoration of glass, porcelain, bone china, earthenware and tiles. 

Firing Range 480-630°C / 896-1166°F for glass and lead-crystal. 650-900°C / 1202-1652°F for porcelain, bone china, earthenware and tiles.

Precious Metal Content

Lustre Purple/Violet contain less than 6 % precious metal or are precious metal free.

Properties Mechanical Resistance

The mechanical resistance of lustres does not achieve the same standard as most ceramic colours and precious metal preparations because the formed lustre film is very thin. Therefore, we recommend that customers test the decorations under their own conditions to achieve the required resistances.Storage  Lustres should be stored in a cool place or at room temperature (approx. 20°C / 68°F).  We recommend that the preparations should be used within 6 months.

Consumption

The material consumption depends on the layer thickness of the applied lustre. This is influenced by the viscosity, the amount of thinner added and by the application of the lustre.

Colour Deviation

Substrate, kiln atmosphere, firing conditions and temperature, and the layer thickness are decisive for a good decoration. To receive good results it is recommended that a test decoration and subsequent firing be carried out.

Processing Conditions Required For Good Results

Make sure that the surface of the object to be decorated is clean and dry. Dust, fingerprints and water condensation can affect the decoration during the firing process.  Take care that the objects to be decorated are not taken from a cold store into a warm workshop.  A fine condensation film may occur which is not visible to the naked eye. This results in faults (eg. pinholes) in the fired lustre decoration!  Allow enough time for the material to adjust to the temperature of the workshop.

Application Information

Brush Application

For the application of Lustre Purple/Violet we recommend fine Casan or squirrel hair brushes.  The lustre should not be brushed smooth, it should be left to “spread“ on the object to be decorated. Only then will the lustre achieve a very smooth and bright appearance after firing.

Drying

The drying time depends on the surrounding atmosphere and the layer thickness of the Lustre Purple/Violet. Decorated objects should be protected from dust before firing. In general, it is recommended to fire the objects as soon as possible after they have dried.

Miscibility

Lustre Purple/Violet can be mixed with each other. However, unpredictable colour changes may occur, especially if lustres containing precious metals are mixed with lustres free of precious metals. We do not recommend mixing orange lustres with brown lustres, as this results in dirty colour shades.

Firing

During the first heating phase the organic components of the preparation burn off. This process is completed at approx. 400°C (750°F).  The lustre film is formed. A constant, slow temperature increase, enough oxygen and sufficient ventilation are decisive for the quality of the fired lustre decoration.  The firing profile considerably influences the mechanical and chemical properties of the fired decoration.  Furthermore, the colour is strongly dependent on the temperature and the firing conditions. The rate of cooling has no major influence on the quality of the lustre decoration, unlike the firing temperature and soak time. However, the firing process should not be stopped too abruptly after the soak time.  Cooling down the decorated article too quickly can cause cracks in the glaze.

Write Review

Lustre Purple/Violet Reviews


There are not yet any reviews on this product.

Instagram @ccg_pottery_ceramics

Want to be kept up to date with
the latest products and specials

Sign up successful!