Powder Guide: Fabric & Feel

Fuse Hot Melt Powders
Choose the right Color Prime® Fuse powder for your fabric and finish

Fuse is a range of four hot melt adhesive powders for DTF transfers. Pick the powder that suits your fabric, then choose
by the finish you want from the print. All four powders transfer at 140°C for 10 seconds.

Which powder do you need?
 

You want... Use
Sharp, colourful graphics and strong adhesion Fuse Standard
To stop dye migration on polyester or synthetics, or halftone and
gradient artwork on dark garments
Fuse Poly
Prints that stretch and move with the fabric Fuse Flex
The softest feel on the print, on any fabric Fuse Air


Fabric guide
All four powders suit cotton, polycotton, polyester and Nylon/Lycra, so you choose by the finish you want rather than by
the fabric. Two things to keep in mind: Fuse Poly is the one to reach for where dye migration is a risk, and Fuse Flex and
Fuse Air are the choices for stretchable fabrics.

Fabric What it's like Powders
Cotton Soft, breathable and absorbent All four
Polycotton Blends the softness of cotton with the durability of
polyester
All four
Polyester Smooth surface that absorbs very little moisture All four. Fuse Poly where dye migration is a risk
Nylon/Lycra Stretchy and resistant to abrasion All four. Fuse Flex and Fuse Air suit stretch


Meet the powders
Fuse Standard
Everyday powder. Formerly Hot Melt Powder.
Crisp, colourful graphics on a bright base.
A fine-grain hot melt powder that bonds well with DTF inks and keeps its flexibility. Its bright, opaque base helps colours
stand out, and it can be used by hand or with a machine.
Features
• A bright, opaque base that lifts colour vibrancy.
• Even, consistent particles lay down smoothly for sharp graphics and strong adhesion.
• Well suited to transfers going onto coarse fabric structures.
• Suits manual or machine processing.
Works on: cotton, polycotton, polyester, nylon and polyurethane (PU) materials.
Specifications
• Cure: 125°C for 60 sec
• Transfer: 140°C for 10 sec
• Particle size: Fine grain
• Sizes: 1 kg, 5 kg
• Storage: 15–35°C, 40–60% humidity, in a cool, dry place away from moisture and direct sunlight. After opening, keep
it airtight and dry.
Fuse Poly
Anti-dye migration powder. New.
Protect your prints from dye bleed.
Developed for garments that are prone to dye migration. It helps stop fabric dyes bleeding into the printed design during
heat transfer, protecting print colour and clarity. It is a grey powder, so half-tone and gradient artwork on dark garments
doesn't show white where there is little ink, while the ink still has a base to sit on.
Features
• Helps block fabric dyes from bleeding into transfers.
• Even coverage gives a reliable bond that is designed to hold through repeated washing.
• A specialty option for polyester garments and dark apparel where colour consistency matters.
Works on: polyester, Nylon/Lycra, cotton and polycotton.
Recommended applications
• Sublimated polyester garments
• Dark polyester fabrics
• Sports jerseys and teamwear
• Custom polyester apparel
• Garments susceptible to dye migration
Specifications
• Cure: 135°C. On a Miro shaker, use 80°C for the front preheat and 135°C for the rear.
• Transfer: 140°C for 10 sec
• Post-press: 140°C for 3–5 sec
• Particle size: 80–200 microns
• Melt flow index: 10–30 g/10 min
• Density: 1.12 g/cm³
• Melting range: 110–130°C
• Sizes: 1 kg, 5 kg
• Shelf life: 24 months, unopened
• Storage: 15–35°C, 40–60% humidity, in a cool, dry place away from moisture and direct sunlight.
Fuse Flex
Stretch powder. Formerly Flex Powder.
Stretch and move without cracking.
A polyurethane-based powder made for stretch performance. It gives prints a smooth, comfortable hand and the flexibility
to move with the fabric, with long-lasting wash results.
Features
• Superior stretchability, so prints move with the fabric without cracking or peeling.
• A soft hand feel for a smooth, comfortable finish.
• Long-lasting performance, with vibrant, durable prints wash after wash.
• Ideal for sportswear, without warping.
Works on: stretchy fabrics, including polyester and Nylon/Lycra, as well as cotton and polycotton.
Specifications
• Cure: 125°C for 60 sec. On a Miro Series shaker, use 80°C at the front and 145°C at the rear.
• Transfer: 140°C for 10 sec
• Particle size: 80–200 microns
• Main raw material: Polyurethane
• Sizes: 1 kg, 5 kg
• Storage: 15–35°C, 40–60% humidity, in a cool, dry place away from moisture and direct sunlight.
Fuse Air
Ultra-soft powder. New.
Great feel gets remembered.
Our softest-feel powder, made for comfort-focused apparel. Fine particles support even coverage, and the flexible
adhesive suits stretchable fabrics.
Features
• An ultra-soft hand feel for a refined finish.
• Flexible, comfortable prints that move with stretchable fabrics.
• Fine particles give even coverage and lasting adhesion
Works on: any fabric in this guide: cotton, polycotton, polyester and Nylon/Lycra.
Recommended applications
• Lightweight t-shirts
• Fashion and casual apparel
• Stretchable fabrics
• Comfort-focused custom garments
• Premium garment decoration
Specifications
• Cure: 135°C. On a Miro shaker, use 80°C for the front preheat and 135°C for the rear.
• Transfer: 140°C for 10 sec
• Post-press: 140°C for 3–5 sec
• Particle size: 60–120 microns
• Melt flow index: 30 g/10 min
• Melting range: 115–120°C
• Wash fastness: Grade 4 at 40°C, grade 3 at 60°C, grade 4 for dry cleaning
• Sizes: 1 kg, 5 kg
• Shelf life: 24 months, unopened
• Storage: 15–35°C, 40–60% humidity, in a cool, dry place away from moisture and direct sunlight.

Settings at a glance
 

Powder Cure Transfer Post-press
Fuse Standard 125°C for 60 sec 140°C for 10 sec  
Fuse Poly 135°C 140°C for 10 sec 140°C for 3–5 sec
Fuse Flex 125°C for 60 sec 140°C for 10 sec  
Fuse Air 135°C 140°C for 10 sec 140°C for 3–5 sec

We recommend testing cure and transfer settings on your own setup for best results. Fuse works with all DTF Station printers and
Color Prime films.


How to use
General steps for use with DTF Station Glide film. Use the settings for your powder from the table above.
1.Print the image on the matte side of the film in mirror mode, with colour first and white ink second.
2.Apply the hot melt powder evenly and remove the excess. A shaker unit such as the Seismo S20 makes this easy.
3.Cure the powder with a heat press hovering above the film, or in a curing oven.
4.Transfer the image with a heat press at medium pressure.
5.Peel the film. Either wait 4–6 seconds and remove it gently, or rub the surface with a cloth to take off some heat first,
then peel gently.
6.Press again briefly at medium pressure to enhance the soft hand feel.
Storage and handling
• Store in a cool, dry place at 15–35°C and 40–60% humidity, away from moisture and direct sunlight. Keep containers
tightly sealed once opened.
• Fuse Poly and Fuse Air have a 24-month shelf life unopened. Properly stored powder may stay usable for longer if it
is free of clumping, moisture absorption and yellowing. Test performance before production use.
• Sizes: 1 kg and 5 kg bags. The 20 kg option ships as four 5 kg bags.
• Safety: do not swallow or inhale the powder or fumes. Avoid contact with skin and eyes, and rinse eyes with plenty of
water if contact occurs. Wear protective clothing, gloves and a mask when handling powder. Skin irritation can occur.
If swallowed, or if an allergic reaction continues, seek medical help straight away.

Total Shares: 0

Back to blog

Want to be kept up to date with
the latest products and specials

Sign up successful!