Colour image is as close a representation that we can provide, however please consult the Union Ink Color Guide for a true depiction.
Light and medium coloured shirts. Hot-split and cold-peel transfers. 100% Cotton fabrics only
Stencils: Use any direct emulsion or capillary film compatible with plastisol inks. Additives: If reducing the inks viscosity is necessary, add 3-5% Viscosity Reducer (PLRE-9000) by weight. Do not use any additives when using Ultrasoft for plastisol transfer production. Curing Direct Prints: Ultrasoft inks will fully cure when the entire thickness of the ink deposit reaches 300° F (149° C). Metallic inks are not recommended for transfer application. Curing Heat Transfers: Ultrasoft ink will semi-cure or gel when it reaches 240°- 250°_ F (115°-121°_ C). For more information on transfers, see the general information Technical Data Sheets. For more information on the additives listed below, see the Plastisol Ink Additives Technical Data Sheets Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.
Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements before using in production.
Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.