Foteco 2078WR Water Based Ink Screen Filler is a water resistant screen filler (for example in ceramic and textile printing) with self-drying characteristics and low viscosity.
It can be used in combination with water based inks or adhesives and water resistant screen emulsions.
Directions
Apply by brush, doctor blade, coating trough, piece of cardboard or plastic onto the open area of the washed-out and dry stencil, mostly on the print side of the stencil. Scrape it evenly into the mesh. If necessary - and to reinforce it - apply a second coat from the opposite of the screen.
Cure for 3 hours at room temperature or for 30 minutes at 40-50°C (104-122°F).
Water only or mineral spirits can be used for the screen washing/cleaning but no solvents as long as the Foteco 2078WR Water Based Ink Screen Filler is not removed.
Storage
Foteco 2078WR Water Based Ink Screen Filler can be stored at room temperature for one year.
Health & Safety
This is an industrial product. Keep away from children.
Foteco 2078WR Water Based Ink Screen Filler is not hazardous. Safety sheets (MSDS) are available on request.
Handling
No special measures are required. The usual precautionary steps for the handling of chemicals should be followed.
