Related Products
Please note: The colour image is as close a representation that we can provide, please consult the Union Ink Color Guide for the true representation.
Union Ink PAGEM800 EF SPARKLING Black Shimmer Instructions:
Direct printing or transfer applications.
Stencils: Use any direct emulsion or capillary film. Additives: Glitter Plastisol inks are supplied ready to print. Reducer/Detackifier (PLRE9000) may be added if a thinner consistency is required.
Printing Instructions: As recommended, mesh counts higher than 40 (15 metric) should not be used as this will limit the inks ability to flow onto the garment and will result in a very spotty, irregular finish. Curing Instructions: These inks will cure at 300°F (149°C). Because of the reflective nature of this ink, it requires a longer curing time and more heat to reach the required temperature than a standard plastisol.
Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.
Union Ink PAGEM800 EF SPARKLING Black Shimmer Performance:
Coverage: High Opacity
After Flash Tack: Decreases with increased mesh
Squeegee:
Profile: Square
Type: Polyurethane
Angle: 10° - 20°
Screen:
Mesh: 24-40 (10-15 metric)
Storage:
Storage Temperature: 65°F - 95°F (18°C - 35°C)
Recommendation:
Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements prior to using in production.