Please note: The colour image is as close a representation that we can provide, please consult the Union Ink Color Guide for the true representation.
Direct printing or transfer applications.
Stencils: Use any direct emulsion or capillary film. Additives: Glitter Plastisol inks are supplied ready to print. Reducer/Detackifier (PLRE9000) may be added if a thinner consistency is required. Mixing: The availability of two Clear Glitter Bases, PAGE9030 Standard Clear Base & PAGE9032 Premium Clear Base. Make it possible for the user to make additional glitter colours by using other Heat Stable dry glitter flakes available from Union Ink or your local distributor.
For a Retro Glossy looking glitter use our PAGE9030 and up to 1.5 - 2 lbs. of dry glitter flake per gallon. For more sparkle and a matte or dry look use our PAGE-9032 and up to 1.5 - 2 lbs. of dry glitter flake per gallon.
Printing Instructions: As recommended, mesh counts higher than 40 (15 metric) should not be used as this will limit the inks ability to flow onto the garment and will result in a very spotty, irregular finish. Curing Instructions: These inks will cure at 300°F (149°C). Because of the reflective nature of this ink, it requires a longer curing time and more heat to reach the required temperature than a standard plastisol.
Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.
Coverage: High Opacity
After Flash Tack: Decreases with increased mesh
Angle: 10° - 20°
Mesh: 24-40 (10-15 metric)
Storage Temperature: 65°F - 95°F (18°C - 35°C)
Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements prior to using in production.
Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.