Please note: The colour image is as close a representation that we can provide, please consult the Union Ink Color Guide for the true representation.

Union Ink PAGEJ220 EF REGULAR Pale Gold Glitter Instructions:

Direct printing or transfer applications.

Stencils: Use any direct emulsion or capillary film. Additives: Glitter Plastisol inks are supplied ready to print. Reducer/Detackifier (PLRE9000) may be added if a thinner consistency is required. Mixing: The availability of two Clear Glitter Bases, PAGE9030 Standard Clear Base & PAGE9032 Premium Clear Base. Make it possible for the user to make additional glitter colours by using other Heat Stable dry glitter flakes available from Union Ink or your local distributor.

For a Retro Glossy looking glitter use our PAGE9030 and up to 1.5 - 2 lbs. of dry glitter flake per gallon. For more sparkle and a matte or dry look use our PAGE-9032 and up to 1.5 - 2 lbs. of dry glitter flake per gallon.

Printing Instructions: As recommended, mesh counts higher than 40 (15 metric) should not be used as this will limit the inks ability to flow onto the garment and will result in a very spotty, irregular finish. Curing Instructions: These inks will cure at 300°F (149°C). Because of the reflective nature of this ink, it requires a longer curing time and more heat to reach the required temperature than a standard plastisol.

Wash-Up: Clean the screens and squeegees with mineral spirits or any Eco-Friendly screen wash designed for plastisol inks.

Union Ink PAGEJ220 EF REGULAR Pale Gold Glitter Performance:

Coverage: High Opacity

After Flash Tack: Decreases with increased mesh

Squeegee:

Profile: Square

Type: Polyurethane

Angle: 10° - 20°

Screen:

Mesh: 24-40 (10-15 metric)

Storage:

Storage Temperature: 65°F - 95°F (18°C - 35°C)

Recommendation:

Caution: Always test this product for curing, adhesion, crocking, opacity, washability and other specific requirements prior to using in production.