Vastex EconoRed-II-54 Infrared Conveyor Dryer 54" Belt

{{ selectedOption.saleSavingsPercent }}% OFF

Serves: {{selectedOption.serves}}

- +

Stock Notification


Model ER-II-54 with 54 in. (137 cm) wide belt and two 48 in. (122 cm) heaters (total 14,400 watts) cures up to 600 plastisol-printed garments/h, or 200 garments/h screen-printed with water-based ink or discharge.

Capacity of both models can be doubled, tripled or quadrupled by adding one, two or three modular heating chambers and conveyor belt extensions-as new or when needs grow.

A top-mounted ventilation system filters exhaust air, cools the enclosure's outer skin, and evacuates moisture and fumes from the heating chamber. It also makes ER-II dryers over 20 percent quieter and 5 in. (13 cm) narrower, and allows the control box to be positioned the right side (standard) or left side of the enclosure to suit shop layouts.

All heaters feature closely spaced coils that provide high-density, medium-wavelength infrared heat for maximum cure speed without cold spots or under-curing, and come with a 15-year warranty.

The Vastex Infrared Focusing System allows heater adjustment to any height from 2 to 7 in. (5.1 to 17.8 cm) above the belt, allowing the operator to compensate for bulky garments or hats, and can be customized to provide additional heater clearance.

All models include a digital belt speed display and a belt tracking system for increased belt life. The digital PID temperature controller is accurate to +/- 1°F (+/-0.5°C), allowing the operator to fine-tune or accurately repeat drying results at any future time.


Top-mounted, Focused Exhaust Air System evacuates fumes and moisture quickly


20% quieter than earlier models


"X-Series" Conveyor Belt Tracking System


Infrared Focusing System allows 2 - 7 in. (5 - 17.7 cm) belt-to-heater height adjustment to accommodate bulky garments or hats, and can be customized to provide additional heater clearance


(Maximum garment width)

54" (137 cm)


48" (122 cm)


42 in. (107 cm)

(Heater width minus 6 in. [15 cm])


Temperature controller accurate to +/-1°F (+/-0.5°C)

Digital PID with fuzzy logic? — industry's most advanced


Heavy duty DC belt speed motor with digital voltage display


Shorter, slimmer and quieter with high heat and production


Add heat chambers at 36 in. (91 cm) long each, and 18 in. (46 cm) belt extensions, front or rear

Write Review

Vastex EconoRed-II-54 Infrared Conveyor Dryer 54" Belt Reviews

There are not yet any reviews on this product.

Suppliers of raw materials for the screen
printing & pottery industries

Want to be kept up to date?

Sign up successful!