Discharge-dyed cotton garments. Terry-cloth towels. Stencils: Use only water-resistant emulsion. Mixing Instuctions: Combine equal parts Plasticharge Additive and a suitable Union plastisol. Stir slowly until completely mixed. Mix only enough for a few days production. Add 4-6% ZFS Discharge Agent (DSPP-9ZFS) just before printing and mix until completely dissolved. After adding the ZFS the ink must be used for discharging within 24 hours.
Caution: The printer must test any colour mixed with Plasticharge Additive on the garment prior to production to determine if the dyes in that garment will discharge. It is recommended that Plasticharge Additive not be mixed with ink colours made from non-permanent type red pigments as oxidation may result in extreme colour shifts.
Union Ink does not knowingly add plasticizers containing the phthalates listed and outlined in California Bill 1108, CPSIA HR-4040 and Oeko-tex Standard 100. The plasticizers identified may include di-(2-ethylhexyl) phthalate (DEHP), dibutyl phthalate (DBP), benzyl butyl phthalate (BBP), diisononyl phthalate (DINP), diisodecyl phthalate (DIDP), di-n-octyl phthalate (DnOP), (DIBP) Di-iso-butyl, and (DMP) Dimethylphthalate, including esters of ortho-phthalic acid and are not direct ingredients in the manufacture of our Non-Phthalate Inks. Union Ink does not test the final product for amounts of the aforementioned phthalate plasticizers and esters and encourages all users to conduct testing for their intended use.