Union Ink PLAE9080 EF Printable Adhesive

Union Ink PLAE9080 EF Printable Adhesive has been formulated as a hot-split/hot-peel transfer adhesive. Union Ink PLAE9080 EF Printable Adhesive can be printed on multiple substrate paper types including: hot-peel/hot-split, cold peel and dual hot split/cold peel transfer papers.

Highlights

• Excellent adhesion to cotton and cotton blend fabrics.
• Improves ink stretch and washability.
• Provides additional ink durability when used on stretchable fabrics.
• Can be used as foil, flock, and fabric adhesive.

Printing Tips

• Use 110t/in mesh (43 t/cm) as standard for large coverage and nondetailed graphics.
• For fine line graphics use up to 195 t/in (77 t/cm) mesh.
• Union Ink PLAE9080 EF Printable Adhesive  is printed last over the transfer inks.
• Slightly under cut graphic image separations so as to allow ink to spread following heat press application.
• Print flat coat of Union Ink PLAE9080 EF Printable Adhesive using a 70/90/70 triple durometer squeegee.
• Gel ink under dryer at 230°F (90°C). Do not cure ink.
• Flash dry colours before applying printable adhesive.

Internationally compliant Non-phthalate